9
10
11
Downloaded From projector-manual.com Acer Manuals
Image is too small
•
or too large
•
•
Image has slanted
•
sides
•
•
Image is reversed
•
Adjust the zoom lever on the top of the projector.
Move the projector closer to or further from the
screen.
Press "MENU" on the remote control. Go to "Image -
-> Aspect Ratio" and try different settings or
press"Aspect Ratio" on the remote control to adjust
directly.
If possible, reposition the projector so that it is
centered on the screen.
Press the "Keystone
/ " button on the remote
control until the sides are vertical.
Press "MENU" on the remote control. Go to "Image -
-> Auto Keystone" and choose "Off" on the OSD, if
"Keystone" button is not available on the remote
control.
Select "Image --> Projection" on the OSD and adjust
the projection direction.
29