Acer X1263 Series User Manual page 31

Maunal Keystone
Aspect Ratio
Sharpeness
H. Position
(Horizontal
position)
V. Position
(Vertical position)
Frequency
Tracking
HDMI Color Range Adjust the color range of the HDMI image data to correct color display
HDMI Scan Info
Downloaded From projector-manual.com Acer Manuals
Adjust image distortion caused by tilting projection. (±40 degrees) (for
X1263/P1163 series only)
<Note> The Manual Keystone function is unavailable under Auto
Keystone setting to "On".
Use this function to choose your desired aspect ratio.
•
Auto: Keep the image with original width-higth ratio and maxi
mize the image to fit native horizontal or vertical pixels.
•
4:3: The image will be scaled to fit the screen and displayed using
a 4:3 ratio.
•
16:9: The image will be scaled to fit the width of the screen and
the height adjusted to display the image using a 16:9 ratio.
Adjusts the sharpness of the image.
•
Press to decrease the sharpness.
•
Press to increase the sharpness.
•
Press to move the image left.
•
Press to move the image right.
•
Press to move the image down.
•
Press to move the image up.
"Frequency" changes the projector's refresh rate to match the
frequency of your computer's graphics card. If you can see a vertical
flickering bar in the projected image, use this function to make the
necessary adjustments.
Synchronizes the signal timing of the projector with the graphics card.
If you experience an unstable or flickering image, use this function to
correct it.
error. (for P1163 series only)
•
Auto: Automatically adjust by information from player.
•
Limited Range: Prosess the input image as limited color range
data.
•
Full Range: Prosess the input image as full color range data.
Adjust the overscan ratio of the HDMI image on screen. (for P1163
series only)
•
Auto: Automatically adjust by information from player.
•
Underscan: Always no overscan on HDMI image.
•
Overscan: Always keep overscan on HDMI image.
Note: "H. Position", "V. Position", "Frequency" and "Tracking" functions
are not supported under HDMI or Video mode.
Note: "HDMI Color Range" and "HDMI Scan Info" functions are only
supported under HDMI mode.
21