Sanyo MCD-Z150F Instruction Manual page 6

Track search
1. In the play mode, press and hold down [ >1 SKIP/SEARCH ] or [SKIP/SEARCH l<<] to lower the
volume level and quickly advance or return to any part of the disc. The number will flash.
2. Release [ >1 SKIP/SEARCH ] or [SKIP/SEARCH l<< ] to return the volume to normal level and
resume play. The number will remain on.
NOTE:
If [ F-I SKIP/SEARCH] is pressed during the pause mode, no sound
WIII
be heard. and the pause
mode will continue when the button
IS
released.
Track skip
1. Press and release [ >1 SKIP/SEARCH] or [SKi P/SEARCH l<<] repeatedly during play to quickly
locate the beginning of a track.
2. [CD TRACK NO.] will show the number of the selected track. Play will continue from the beginning of
the new track.
NOTE:
If [ FI SKIP/SEARCH ] or [SKIP/SEARCH l<<] is pressed when the unit is in pause mode, when
the button is released. the unit will remain in the pause mode.
PROGRAMMED PLAY
With programmed play, up to 16 tracks on a disc can be memorized and played in any order. [CD TRACK
NO.] will show the track number 1 -19.
In this example, tracks 1-8 on a 10-track disc are entered into the unit's program memory, for play in the
order shown in Fig. 5.
Example program
1. Press [STOP/CLEAR].
2. Press [ F1 SKIP/SEARCH ] repeatedly until [CD TRACK NO.] shows "5". The number will flash.
3, Press [MEMORY] The number
WIII
remain on. [MEMORY]
WII
hght.
4. Press [SKIP/SEARCH l<+] repeatedly until [CD TRACK NO.] shows "3'. The number will flash.
5. Press [MEMORY]. The number will remain on.
6. Repeat steps 2-3 to memorize tracks 1, 8, 2, 7, 6, 1 and 4.
NOTE:
A track number can be entered more than once.
7. Checking the program
After the Iasttrack number has been entered, press [MEMORY] to vlewthe memorized track numbers,
in the order they were entered and last display will display "O".
8. Press [PLAY/PAUSE]. Programmed play will begin with the first programmed track.
9. When the last programmed track has finished playing, the CD player will stop, unless [REPEAT] has
been pressed (see REPEAT PLAY).
NOTE:
If you want to add a program number, select the track number, and press [MEMORY]. It is not possible
to change a programmed entry, or to add an entry between the programmed selections.
Ending programmed play
Press [STOP/CLEAR] twice (during programmed play), or once (during the stop mode), to clear the
program memory.
-7-