Noise Reduction - Olympus CAMEDIA C-5000 Zoom Reference Manual

NOISE REDUCTION

This function reduces the noise that is generated during long exposures.
When shooting night scenes, shutter speeds become slower and noise tends
to appear on images. When noise reduction is set to ON, the camera
automatically reduces noise to produce clearer images. However, shooting
time is approximately twice as long as usual.
Noise reduction can only be used when the shutter speed is set slower than
1 sec.
Noise Reduction: OFF
The purpose of these pictures is to illustrate the effects of noise reduction.
They are not actual pictures.
Mode dial
1
In the top menu, select MODE
6
MENU
REDUCTION
press e.
g"How to use the menus" (P.33)
• Press e again to exit the menu.
• Noise reduction is enabled in the m mode.
• When noise reduction is set to ON, the camera implements noise-
reducing processes after each shot to produce clearer images.
Note
However, shooting time is over twice as long as usual. During this
time, the next shot cannot be taken.
• When noise reduction is set to ON, sequential shooting (j,
k, BKT) are not possible.
• This function may not work effectively with some shooting conditions
or subjects.
• Use of a tripod is recommended for slow shutter speeds.
104
CAMERA NOISE
ON or OFF, and
Noise Reduction: ON
Arrow pad
OK button