Stihl MS 311 Service Manual page 19

1
: Fit the retainers (1).
1
: Fit the clutch shoes (2) over the
arms (1).
: Clamp the clutch in a
vise (arrow).
18
2
1
Attach the springs (1) on the side
with the raised hexagon (arrow).
: Attach one end of each spring (1)
2
to the clutch shoes.
: Use the hook (2) 5910 890 2800
to attach the other ends of the
springs and press them firmly into
the clutch shoes.
: Check the clutch – all springs
(arrows) must be properly
attached.
1
Make sure the washer (1) is in
place.
Installed position is correct when
TOP (arrow) faces outwards.
: Position the clutch on the
crankshaft stub so that the raised
hexagon (arrow) faces outwards.
MS 311, MS 391