Table of Contents
Advertisement
#
Icon
(#)
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
Downloaded From projector-manual.com Acer Manuals
Function
Laser button
Aim the remote at the viewing screen, press and hold this
button to activate the laser pointer.
This function is not supported in Japanese market.
Enter
No function.
Four directional
Use up, down, left, right buttons to select items or make
select keys
adjustments to your selection.
KEYSTONE
Adjusts the image to compensate for distortion caused by
tilting the projector (± 40 degrees).
•
MENU
Press "MENU" to launch the Onscreen display (OSD)
menu, back to the previous step for the OSD menu
operation or exit the OSD menu.
•
Confirm your selection of items.
MOUSE Left/
Left-/right-click buttons are on the left and right,
Right Click
respectively; the center button works as a multidirectional
pointer stick. To enable this function, an USB cable must be
connected to projector from your PC.
Empowering key Unique Acer functions: eView, eTimer, e3D and ePower
Management.
VOLUME
Increases/decreases the volume.
PAGE
For computer mode only. Use this button to select the next
or previous page. This function is only available when
connected to a computer via a USB cable.
Prev
No function.
Next
No function.
Play/Pause
No function.
Stop
No function.
VGA
Press "VGA" to change source to the VGA connector. This
connector supports analog RGB, YPbPr (480p/576p/720p/
1080i), YCbCr (480i/576i) and RGBsync.
S-VIDEO
To change source to S-Video.
COMPONENT
Press "COMPONENT" to change source to Component
video. This connection supports YPbPr (480p/576p/720p/
1080i) and YCbCr (480i/576i).
VIDEO
To change source to COMPOSITE VIDEO.
SD/USB A
No function.
USB B
No function.
HDMI™/DVI
Press "HDMI™/DVI" to change source to HDMI™/DVI.
LAN/WiFi
No function.
KeyPad 0~9
Press "0~9" to input a password in the "Security".
Note: "#" Japan area is not supported.
Description
7
Advertisement
Table of Contents
