Table of Contents
Advertisement
To Change the Lamp
1
Turn off the projector by pressing the power button.
2
Allow the projector at least 30 mins to cool down.
3
Disconnect the power cord.
4
Open the screw covers on both sides of the projector. (Illustration #1)
5
Remove the two screws on both sides of the projector at the same time.
(Illustration #2)
6
Open the top cover. (Illustration #3)
7
Remove the three screws that secure the lamp module (Illustration #4) and
pull up the lamp bar.(Illustration #5)
8
Pull out the lamp module by force. (Illustration #6)
To replace the lamp module, reverse the previous step.
Downloaded From projector-manual.com Acer Manuals
Warning: To reduce the risk of personal injury, do not drop the
lamp module or touch the lamp bulb. The bulb may shatter and
cause injury if it is dropped.
35
Advertisement
Table of Contents
