Epson PM 210 User Manual page 37

Connecting and disconnecting the
Bluetooth Photo Print Adapter
Connecting
1. Insert the Adapter connector into the EXT. I/F port
as shown below.
Caution:
c
Do not connect this product while the
printer is operating. Doing so may cause
the printer to malfunction.
2. The Adapter's light comes on for one second. If
the LED does not turn on, disconnect the Adapter
from PictureMate, then reconnect it.
Disconnecting
Remove the Adapter's connector from the EXT. I/F
port as shown below.
Caution:
c
❏
Do not remove this product while
communicating with another device.
❏
Do not disconnect this product while the
printer is operating. Doing so may cause
the printer to malfunction.
❏
Do not remove this product by pulling on its
upper section. Doing so may damage the
product.
29