Pen Input Not Working; The Tablet Pc Does Not Start After Switch On; The Tablet Pc Stops Working - Fujitsu stylistic q775 Operating Manual

Troubleshooting and tips

Pen input not working

Cause
Incorrect driver installed.

The Tablet PC does not start after switch on

TheTabletPC
Cause
The battery is dead.
The power adapter is not connected correctly.

The Tablet PC stops working

Energysaving mode TheTabletPC
Cause
The Tablet PC is in energy saving mode.
An application programme has caused the
malfunction.
The battery is dead.
82
Troubleshooting
► If your device is one which can only be
operated using the pen, install the driver for
the standard model.
or
► If your device is one which can be
operated using the pen and by finger,
install the driver for the "Dual Digitizer"
model.
Troubleshooting
► Charge the battery.
or
► Connect the mains adapter to the Tablet
PC.
► Check whether the mains adapter is
connected correctly to the Tablet PC.
► Switch on the Tablet PC.
Troubleshooting
► Leave energy saving mode.
► Close the application program or restart
the Tablet PC (by restarting the operating
system or switching the device off and back
on again).
► Charge the battery.
or
► Connect the mains adapter to the Tablet
PC.
Fujitsu