Samsung np-q1ex User Manual page 198

To connect the headset to another
Bluetooth device such as a PC or cell
phone, the headset must be in Pairing
mode.
Switch the headset to Pairing mode
and then retry the search operation.
In general, the headset in Pairing
mode automatically returns to On/Off
mode after a certain period of time.
There is no sound or sound is
Q
intermittently interrupted after
connecting a headset.
A1 If your headset is a mono headset,
check if a mono headset connection
has been made. In this case, to
resolve the problem, complete the
procedures below.
z D ouble-click over the Bluetooth icon
on the Taskbar, double-click the
headset and check the connection
status of the Bluetooth Headset and
Microphone. If it is not connected,
right click over the device and select
Connect from the pop-up menu.
x R ight-click over the Speaker icon
on the Taskbar, select Playback
Devices, and make sure that the
Bluetooth SCO Audio is enabled. If
not, right-click over Bluetooth SCO
Audio and select Set as Default
Device.
A2 If your head set is a stereo headset,
you have to check if the headset is
connected as a stereo headset.
To resolve the problem, complete the
procedures below.
z D ouble-click the Bluetooth icon on
the Taskbar, double-click the headset
and check the connection status of
the Bluetooth Advanced Audio. If it
is not connected, right-click over the
device and select Connect from the
pop-up menu.
x C heck the status of Bluetooth
Headset and Microphone. If
connected, right-click over the device
and select Disconnect or Mute On
for stopping the function.
c R ight-click over the Speaker icon
on the Taskbar, select Playback
Devices, and make sure that the
Bluetooth AV Audio is enabled. If
not, right-click over Bluetooth AV
Audio and select Set as Default
Device.
After changing the Bluetooth or
sound settings, you must exit and re-
run the audio/video player program
(such as Windows Media Player) to
apply the changed settings.
198