Samsung np-q1ex User Manual page 196

During the wireless Ad-Hoc
Q
network operation, the AP (Access
Point) is intermittently not found.
A This problem occurs intermittently
during the wireless Ad-Hoc network
operation. Even if this problem
occurs, the wireless Ad-Hoc network
operation is working properly and is
not affected. Click Refresh to update
the AP list.
I have set the same IP address
Q
for both the wireless and wired
connections, but they do not work
properly.
A You cannot use wireless and wired
connections using the same IP
address. To sequentially use both the
wired and wireless connections with
the same IP address, you need to set
the currently not needed connection
to Do Not Use in the Network
Connections of the Control Panel.
The wireless LAN does not
Q
work properly when there is a
device operating on an adjacent
frequency in the vicinity of the
product.
A1 Channel interference may occur when
a wireless video transceiver or a
microwave oven is being used. If you
experience channel interference from
other equipment, we recommended
changing the channel for connecting
to the AP. For more information about
AP settings, refer to the User Manual
supplied by the AP manufacturer.
A2 Since IEEE802.11g equipment
operates in hybrid mode when there
is active IEEE802.11b equipment, the
data rate may be degraded.
196