Samsung np-q1ex User Manual page 109

5
Select Internet Protocol Version 4
(TCP/IPv4) from the Networking tab
and click Properties.
 The LAN device driver may differ
depending on your LAN device
model.
 To add a network component, click
Install in the screen shown in the
figure above. You can add clients,
services, and protocols.
6
Configure the IP settings.
When using DHCP, select Obtain an
IP address automatically. To use
a static IP address, select Use the
following IP address, and set the IP
address manually.
When not using DHCP, ask your
network administrator for the IP
address.
7
When you have completed the
settings, click the OK button.
The network settings have been
completed.
109