Setting The Warning Tone; Sleep - Setting The Time Until The Camera Enters Sleep Mode - Olympus CAMEDIA C-8080 Wide Zoom Reference Manual

Olympus digital camera basic manual
Hide thumbs Also See for CAMEDIA C-8080 Wide Zoom:
Table of Contents

Advertisement

Setting the warning tone

You can select the volume of the beep sound used for warnings from OFF,
LOW, or HIGH. You can turn the sound off completely by setting OFF.
Mode dial
1
Select SETUP
and press e.
g"Menu basics" (P.38)
SLEEP – Setting the time until the camera enters sleep mode
The camera automatically enters the sleep mode after being left unoperated for
a preset length of time. Press the shutter button or arrow pad to cancel the sleep
mode and reactivate the camera.
Mode dial
1
Select SETUP
MIN, 3 MIN, 5 MIN or 10 MIN, and press e.
g"Menu basics" (P.38)
• The camera will not enter sleep mode when powered by the AC adapter.
• In q mode, the camera will enter sleep mode and the monitor will turn off
Note
after 3 minutes of non-operation, regardless of the time set in the sleep
timer.
• In slideshow mode, the camera will enter sleep mode and the monitor will
turn off after 30 minutes.
• In shooting mode, when the powersaving mode is set to ON, the camera will
enter sleep mode and the viewfinder will turn off after 10 seconds,
regardless of the time set in the sleep timer.
8
OFF, LOW or HIGH,
SLEEP TIMER
30 SEC, 1
Arrow pad
OK button
9
Arrow pad
OK button
169

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

8080 - camedia c wide zoom digital camera

Table of Contents