Error Codes - Olympus C-990ZOOM Instrucciones De Operación

Error Codes

The monitor displays error codes and indicators on the control
panel blink to alert you to various problems.
Warning
Monitor Display
NO CARD
The card is not being
recognized.
CARD FULL
Number of storable
pictures is 0.
WRITE PROTECT
A write protect seal has
been placed on the card
and cannot be written to.
CARD ERROR
This card cannot be
used.
28
Error
There is no card in the
camera, or the card is not
inserted correctly.
The card is full.
The camera cannot enter
picture, erase or card-
format mode.
You are unable to shoot,
playback, or erase pictures
with this card.
Remedy
Insert or remove and
reinsert the card.
Replace the card, erase
unwanted pictures, or trans-
fer the data to a computer
and erase all the data to
free up space on the card.
Remove the write-protect
seal before taking any
pictures.
Wipe the terminal area of
the card with lens paper
and insert the card again.
A card that cannot be
formatted cannot be used.