1.4
1 . 4 . 1
The motherboard comes with two 184-pin Double Data Rate (DDR) Dual
Inline Memory Modules (DIMM) sockets.
The following figure illustrates the location of the sockets:
1 . 4 . 2
You may install 256 MB, 512 MB and 1 GB unbuffered non-ECC DDR DIMMs
into the DIMM sockets using the memory configurations in this section.
1-14
This Manual: http://www.manuallib.com/file/2595652
System memory
DIMM sockets location
P5SD1-FM2 184-pin DDR DIMM sockets
Memory Configurations
•
Always install DIMMs with the same CAS latency. For optimum
compatibility, we recommend that you obtain memory modules from
the same vendor. Refer to the DDR Qualified Vendors List on the
next page for details.
•
Due to chipset resource allocation, the system may detect less than
2 GB system memory when you installed two 1 GB DDR memory
modules.
•
This motherboard does not support memory modules made up of
128 Mb chips or double sided x16 memory modules.
Chapter 1: Hardware information