Downloaded From projector-manual.com Acer Manuals
When you select this function, the projector reverses the image so
you can project from behind a translucent screen.
When you select this function, the projector reverses and inverts
the image at same time. You can project from behind a
translucent screen with ceiling mounted projection.
Choose the menu location on the display screen.
to move the image left.
to to move the image right.
to move the image down.
to move the image up.
"Frequency" changes the projector's refresh rate to match the
frequency of your computer's graphics card. If you can see a vertical
flickering bar in the projected image, use this function to make the
Synchronizes the signal timing of the projector with the graphics card.
If you experience an unstable or flickering image, use this function to
Adjusts the sharpness of the image.
to decrease the sharpness.
to increase the sharpness.
Note: "H. Position", "V. Position", "Frequency" and "Tracking" functions
are not supported under DVI or Video mode.
Note: "Sharpness" functions is not supported under DVI and Computer