Downloaded From projector-manual.com Acer Manuals
Press "MENU" to launch the Onscreen display (OSD) menu,
back to the previous step for the OSD menu operation or
exit the OSD menu.
Confirm your selection of items.
Use up, down, left, right buttons to select items or make
adjustments to your selection.
Adjusts the image to compensate for distortion caused by
tilting the projector.
Choose the menu location on the display screen.
For computer mode only. Use this button to select the next or
previous page. This function is only available when connected
to a computer via a USB cable.
Unique Acer functions: eOpening, eView, eTimer, ePower
Press "COLOR" to adjust the color temperature of image.
Use the "CONTRAST" option to control the difference
between the lightest and darkest parts of the picture.
To change source to COMPOSITE VIDEO.
To change source to S-Video.
Press "PIP" to see two screens at the same time. The main
screen projection signal uses VGA input by default while the
smaller PIP display uses a secondary video source.
Press "WIRELESS" to display the image which is wirelessly
transmitted from the PC to the projector via the "Acer
eProjection Management" utility. (for wireless model)
Press "BRIGHTNESS" to adjust the brightness of the image.
Press "RGB" for true-color optimization.
Press "COMPONENT" to change source to Component video.
This connection supports YPbPr (480p/576p/720p/1080i) and
Press "VGA" to change source to the VGA connector. This
connector supports analog RGB, YPbPr (480p/576p/720p/
1080i), YCbCr (480i/576i) and RGBsync.
Press "DVI" to change source to DVI. This connection supports
digital RGB, analog RGB, YPbPr (480p/576p/720p/1080i), YCbCr
(480i/576i) and HDCP signals.
To change source to HDMI™.
Press "0~9" to input a password in the "Security settings".
Note: "*" Only for P7270i/P7280i series.
"#" Japan area is not supported.