Olympus CAMEDIA C-70 ZOOM Advanced Manual page 159

Possible cause
The monitor goes off.
The camera is in the
sleep mode.
The power is turned off
with the monitor off.
The flash does not fire.
The flash was closed.
The subject is
illuminated.
Sequential shooting,
high speed sequential
shooting or auto
bracketing is set.
The camera records
movies.
Super macro mode is
set.
Panorama mode is set.
The battery run time is brief.
You are using the
camera in a cold
environment.
The remaining battery
power is not indicated
correctly.
The green and orange lamps on the side of the viewfinder blink simultaneously.
The battery is depleted.
* Condensation: When it is cold outside, the water vapor in the air is rapidly cooled and
turns to droplets of water.
Condensation occurs when the camera is suddenly taken from a cold
place into a warm room.
Corrective action
Operate the camera (press the shutter button
or zoom lever).
If [ALL RESET] in the mode menu is set to
[OFF], the camera settings before the power
was turned off remain unchanged. Turn on
the monitor, and turn off the power.
Press the flash button to make the flash pop
up.
If you want the flash to fire on a brightly
illuminated subject, set the flash to fill-in
mode.
The flash does not fire in the sequential
shooting, high speed sequential shooting or
auto bracketing mode.
Set [DRIVE] to [o] in the mode menu.
The flash does not fire in the movie mode.
Select a shooting mode other than n.
The flash does not fire in the super macro
mode. Set [&] to [OFF] or [&].
The flash does not fire in the panorama
mode.
Battery performance deteriorates in low
temperatures. Keep the camera warm by
putting it inside your coat or clothing.
When battery consumption fluctuates
considerably, the camera may turn off
without displaying the battery warning
indicator. Charge the battery.
Charge the battery.
Troubleshooting
Ref.
page
–
P.23,
103
P.37
P.37
P.71
P.69
P.36
P.75
–
–
–
159
10