Connecting The Camera To A Printer - Olympus CAMEDIA C-70 ZOOM Advanced Manual

Connecting the camera to a printer

Use the USB cable provided to connect the camera to a PictBridge-compatible printer.
Mode dial
1
Turn the printer on and plug the
printer end of the USB cable into
the printer's USB port.
• For details of how to turn the printer on
and the position of the USB port, refer to
the printer's instruction manual.
2
Plug the USB cable into the
camera's multi-connector.
• The monitor turns on and the selection
screen for the USB connection is
displayed.
3
Select [PRINT] and press e.
• "ONE MOMENT" is displayed and the
camera and printer are connected. The
[PRINT MODE SELECT] screen is
displayed on the monitor. Select the
print settings on the camera's monitor.
gGo to "Printing pictures" (P.124)
Note
• When the [USB] mode is set to [PC], the [PRINT MODE SELECT] screen is not
displayed. Disconnect the USB cable, and repeat the procedure from Step 1.
Direct printing (PictBridge)
Connector
cover
Multi-connector
USB
PRINT
SELECT
P C
8
EXIT
GO OK
123