Saving Camera Settings (All Reset) - Olympus CAMEDIA C-500 ZOOM Advanced Manual

Saving camera settings (ALL RESET)

This function lets you choose whether or not to save the current camera
settings after the power is turned off. The settings affected by [ALL
RESET] are listed below.
The [ALL RESET] setting ([ON]/[OFF]) applies to all modes. It applies
whether the camera is in shooting mode or playback mode.
ON All settings are returned to the factory default settings after the power is
turned off (initial settings).
Example: If [ALL RESET] is set to [ON] and [K] is changed to [SQ1],
OFF The settings made before the power is turned off are saved.
Top menu [MODE MENU]
• In : Top menu
1
Select [OFF] or [ON], and press Z.
Note
• The settings in the [SETUP] tab in the [MODE MENU] ([ALL RESET], [W],
[8], etc.) are saved even when [ALL RESET] is set to [ON].
(Functions that return to default settings when [ALL
RESET] is set [ON].
Function
default setting
Exposure 0.0
compensation
FLASH MODE AUTO
∗
Monitor ON
(Lights)
ESP/n ESP
&
OFF
j OFF
ISO AUTO(M: 50)
SCENE SELECT o
∗
This sets whether the monitor turns on or not when the camera is turned on in
shooting mode.
[K] returns to the factory default setting ([HQ]) when the
camera is turned on again.
[SETUP]
[SETUP] [ALL RESET]
Factory Ref.
page
P. 44
P. 42
P. 24
P. 46
P. 41
P. 52
P. 47
P. 37
[ALL RESET]
g"How to use the menus" (P. 16)
Function
default setting
DIGITAL OFF
ZOOM
R (still pictures) OFF
R (movies)
ON
FUNCTION OFF
NOISE REDUCTION OFF
K HQ
WB AUTO
INFO OFF
Factory Ref.
page
P. 40
P. 58
P. 51
P. 54
P. 59
P. 27
P. 48
P. 74
81
6