Olympus C-460 Reference Manual page 87

Sequential shooting
2
Select the exposure differential.
Press ac to select ±0.3, ±0.7 or
±1.0, then press d.
3
Select the number of shots. Press ac to select ×3 or ×5,
then press e.
• Press e repeatedly until the menu disappears.
4
Take the picture.
• Press the shutter button fully and keep it pressed to shoot the preset
number of pictures. You can stop shooting at any time by releasing the
shutter button.
5
• Sequential shooting (j, i, k, 7) is not possible in
the following situations:
Note
– When the TIFF or SHQ record mode is set to ENLARGE SIZE
– When NOISE REDUCTION is set to ON.
• Auto bracketing is not possible in M mode.
• The flash does not fire in 7 mode.
• In modes other than S and M, since the shutter speed is set to max.
1/30 sec., exposure is decreased when shooting a dark subject.
• In 7 mode other than S mode, if the shutter speed is set to
longer than 1/30 sec. when the exposure differential is 0, the shutter
speed is fixed at 1/30 sec. and the picture is taken in 7 mode.
• If the battery power is low and the battery check blinks during
sequential shooting, shooting stops and the camera starts saving
the pictures you have taken. Whether or not all of the shots are
saved depends on how much battery power remains.
• If there is not enough space available on the card for the number of
frames you have set during auto bracketing, you cannot continue
shooting.
86
BKt
CANCEL
SELECt GO