Saeco GranBaristo HD8964 User Manual page 72

ENGLISH
70
12 Thoroughly clean the upper screen using a non-abrasive cloth to
remove any coff ee grounds.
Warning:
Danger of burning! The upper screen is a hot component. Make sure
that the machine has cooled down, before cleaning. Perform the op-
eration when the machine has been turned off for at least one hour.
13
Make sure that the brew group is in the off position; the two reference
marks must match. If they do not match, proceed as described in steps
(14 and 15).
14 Turn the brew group back to the off position by manually turning the
pin on the base, as shown in this fi gure. Turn it until it locks into the
position described in the following step.
15 When you reach the position shown in this fi gure, check that the two
reference signs match and that the brew group is locked into position.