Taking Still Pictures Using The Monitor - Olympus Camedia C-120 Reference Manual

Olympus digital camera c-120, d-380
Hide thumbs Also See for Camedia C-120:
Table of Contents

Advertisement

Taking still pictures

Taking still pictures using the monitor

1
Open the lens barrier.
2
Press
The monitor turns on.
"Monitor indications" (
3
Determine the image composition
while observing your subject on the
monitor.
4
Take the picture by following the
same procedure as for shooting
using the viewfinder.
Press the shutter button all the way (fully) to take the picture.
"Taking still pictures using the viewfinder" (
When you want to take pictures with the monitor off, press
• While the green lamp is blinking after the shutter button is pressed
halfway, the flash is charging. While the green lamp is blinking after
shooting, the picture you just took is being stored. Wait until the lamp
goes off to take another picture (approx. 2 to 40 seconds).
• If the memory gauge is fully lit, you cannot take any pictures. Wait a
few seconds until the memory gauge goes off to take another picture.
"Memory gauge" (
• The monitor is used for checking the image composition. Camera
shake, the correct focus and exposure condition of the recorded
picture should be checked by the close-up playback. "Close-up
playback" (
30
.
p.8)
p.9)
p.55)
p.29)
again.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Camedia d-380

Table of Contents