Sony SNC-Z20N Installation Manual page 31

Image recording on the built-in
memory or recommended ATA
memory card
You can record still images from the camera
onto the camera's built-in memory (about 8
MB) or recommended ATA memory card (a
"Memory Stick" inserted into a PC card
adaptor). You can record a still image at the
moment when a trigger by the external
sensor input, built-in activity detection
function or manual trigger button occurs, or
still images sequentially for a determined
period before and after the trigger. Periodic
recording of still images is also possible.
Image transmission using an E-
mail or FTP server
You can send a still image from the camera
as an attachment of an E-mail or to an FTP
server, at the moment when a trigger by the
external sensor input, built-in activity
detection function or manual trigger button
occurs. You can also send still images
sequentially for a determined period before
and after the trigger to an FTP server, or send
them periodically.
If you use the FTP client software of the
computer, you can also search for and
receive the still image recorded in the built-
in memory or recommended ATA memory
card (a "Memory Stick" inserted into a PC
card adaptor) inserted into the PC card slot
of the camera.
Alarm output
The camera is equipped with two sets of
alarm outputs. You can use them to control
peripheral devices by synchronizing with the
external sensor inputs, built-in activity
detection function, manual trigger button,
Day/Night function or timer.
Transparency-type RS-232C interface
If you connect peripheral devices to the
camera via the RS-232C interface, you can
control the devices from the computer via
the network and receive data from these
devices.
Analog video output
The analog video output allows connecting a
VTR or TV monitor for local image
recording and monitoring.
5
GB
Features