INSTALLATION
5. Thread bare end of the 9.5 foot drop cable through one channel
of the fastlink wire joiner, through or around the ceiling anchor
point, then back through the opposite channel of the wire joiner to
connect the cable and lock it into the joiner
6. Thread the bare end of a safety cable (not included) through one
channel of a second wire joiner (not included), through or around a
different ceiling anchor point then through the opposite channel of
the wire joiner used. Attach its eyelet into a carabiner, s-hook, etc.
(not included) and attached to the speaker seismic tab. Make sure
the suspended speaker's weight is held entirely by the drop cable.