LG Minibeam PA1000 Owner's Manual page 9

Others
WARNING
When you go out, place the projector
y
out of reach of animals, and remove
the power plug from the wall outlet.
- Using a damaged power cord may
result in short circuit or fire.
Do not use the projector near high-
y
precision electronic devices or those
that transmit weak radio signal.
- This may affect the operation of the
product, causing an accident.
Only a qualified technician can
y
disassemble or modify the projector.
For diagnosis, adjustment, or repair,
contact your seller or our service
center.
- This may result in fire or electric
shock.
Do not stare directly into lens when in
y
operation, eye damage can occur.
No user serviceable parts inside unit.
y
High voltage parts can cause shock
and even electrocution.
Proper ventilation required, do not
y
block airflow around unit. Doing
so can cause injury and internal
overheating.
To prevent damage to lamp, unit must
y
remain plugged in for approximately
3 minutes after power down to allow
for proper cool down (not applicable
on LED models).
Do not touch the lens; doing so can
y
result in burns or damage to lens.
Lens and unit may be HOT during
and immediately after use. Use
caution when handling unit, allowing
for proper cool down.
SAFETY INSTRUCTIONS
Only use a grounded electrical outlet.
y
Do not insert anything into or cover
y
up the exhaust vents.
- This may result in fire or electric
shock.
Follow all maintenance guidelines
y
for optimal use; service only at an
authorized service center.
Lamp contains mercury and as such
y
must be disposed of according to
local, state and federal laws (not
applicable on LED models).
9