Table of Contents
Advertisement
Using external equipment
Please use the INPUT 4 terminal when connecting HOMI equipment.
A
HOMI cable
e
(commercially available)
C~~
HDMI equipment
To watch an HOMI equipment image, select
"INPUT4" from "INPUT SOURCE" menu
using INPUT on the remote control unit or
on the TV. (See page 60.)
Press
./T
to select the desired item and
press ENTER.
Press
./T
I
~/~
to select the desired setting
and press ENTER.
Signal
Auto/RGB/YCbCr
Select the signal type from
Type
4:4:4/YCbCr 4:2:2
an HDMI terminal. Unless
the image quality looks
obviously poor, select Auto.
Color
Auto/ITU601/
Select the internal color
Matrix
ITU709
space conversion method
when an RGB signal is
input. Normally, select
Auto.
Dynamic
Standard/
Select the signal amplitude
Range
Out of Standard
range. Normally, select
Standard.
Press MENU and the MENU screen displays.
Press
~/~
to select "Option".
Auto View Enable/Disable
Set whether or not to use
VIEW MODE based on
signal recognition,
including an HDMI signal.
(QID-50
Press
./T
to select "HOMI Setup", and then
press ENTER.
Lm~.,
• Refer to your external equipment operation manual for
the signal type.
Advertisement
Table of Contents
