Table of Contents
Advertisement
26
Management
ECO Mode
High Altitude
Auto Shutdown
Lamp Hour Elapse
Lamp Reminding
Lamp Hour Reset
Setting
Menu Location
Source Lock
Downloaded From projector-manual.com Acer Manuals
Choose "On" to dim the projector lamp which will lower power
consumption, extend the lamp life and reduce noise. Choose "Off"
to return normal mode.
Choose "On" to turn on High Altitude mode. Operate the fans at
full speed continuously to allow for proper high altitude cooling of
the projector.
The projector will automatically shutdown when there is no signal
input after the allocated time. (in minutes)
Displays the lamp's elapsed operating time (in hours).
Activate this function to display a reminder to change the lamp 30
hours before its expected end-of-life.
Press the
button and choose "Yes" to turn the lamp hour
counter to 0 hours.
Choose the menu location on the display screen.
When source lock is turned "off", the projector will search for
other signals if the current input signal is lost. When source lock is
turned "on", it will "lock" the current source channel unless you
press "Source" button on the remote control for the next channel.
Advertisement
Table of Contents
