Table of Contents
Advertisement
Appendices
Troubleshooting
If you experience a problem with your Acer projector, refer to the following
troubleshooting guide. If the problem persists, please contact your local reseller
or service center.
Image Problems and Solutions
#
1
No image appears
onscreen
2
Partial, scrolling or
incorrectly
displayed
image(For PC
(Windows 2000/XP/
Vista/Windows 7))
Downloaded From projector-manual.com Acer Manuals
Problem
•
Connected as described in the "Getting Started"
section.
•
Ensure none of the connector pins are bent or
broken.
•
Check if the projector lamp has been securely
installed. Please refer to the "Replacing the Lamp"
section.
•
Make sure you have removed the lens cap and the
projector is switched on.
•
Press "RESYNC" on the remote control or control panel.
•
For an incorrectly displayed image:
•
•
•
•
If the problem still appears, change the monitor display
you are using and follow the steps below:
•
•
•
•
Solution
Open "My Computer," open the "Control
Panel," and then double-click the "Display"
icon.
Select the "Settings" tab.
Verify that your display resolution setting is
lower than or equal to UXGA (1600 x 1200).
Click the "Advanced Properties" button.
Verify that the resolution setting is lower than
or equal to UXGA (1600 x 1200).
Click the "Change" button under the
"Monitor" tab.
Click "Show all devices". Next, select "Standard
monitor types" under the SP box, and choose
the resolution mode you need under the
"Models" box.
Verify that the resolution setting of the
monitor display is lower than or equal to UXGA
(1600 x 1200).
31
Advertisement
Table of Contents
