Advertisement
（3）connect with two 3-cell batteries：
2、Button instruction：
START/STOP：
To start or stop the current status, it is available at any time, so it's important to finish
all parameter (voltage and current) setting for charging or discharging before press this
button.
SET：
Only the charger is not working, this button is enabled. Press SET to enter menu of
setting for VOICE, FUNCTION, CURRENT, VOLTAGE and BETTERY GROUP. When
one of the options displayed reversed, use the button key "+/▲" or "-/▼" to get the
relative data.
Voice indicator：
When the charging stopped, press SET to choose the option VOICE INDICATOR,
and use"+/▲" or "-/▼" to set voice ON or OFF. Then press SET to choose the next
option.
Charging port：
When the charging stopped, press SET to choose the option PORT, press "+/▲"or
"-/▼" to choose the port and then press SET for next option.
Function：
When the charging stopped, press SET to choose FUNCTION, press "+/▲" or"-/▼" to
select different status: CYCLE CHARGING, PARALLEL, DISCHARGING, VOLTAGE
MEASURE, and then press SET for next option.
Voltage and current setting：
When the charging stopped, press SET to choose the option VOLTAGE/ CURRENT,
and then press"+/▲"or"-/▼" to set voltage and current, then press SET for next
option.
3、Operation
Connect the charger with a DC power source of output voltage 10.5-15V and current
not less than 15A, and then connect a 6-cell battery with it, power on the charger.
Advertisement
