Table of Contents
Advertisement
3.1.4. MOUNTING IR850 TO THE ATN PS15
IR850 may be mounted on the goggles through the Picatinny
adapter.
1. Loosen the IR850 fixing screw.
2. Mount the IR850 on the PS15 and tighten the fixing screw.
3.1.5. MOUNTING CAMERA/CAMCORDER
TO THE ATN PS15
1. Screw Camera Adapter (Figure 3-6, (A)) into the front lens of
a photographic camera (thread M52x0.75) or a video camera
(use adapter ring threaded M37x0.75 (Figure 3-7)).
2. Remove the rubber eyecup off one of the goggles eyepieces.
3. Connect the adapter with the eyepiece and gently tighten 3
fixing screws (Figure 3-6, (B)) on the adapter.
FIGURE 3-6. MOUNTING CAMERA TO THE ATN PS15
FIGURE 3-5. ATN PS15 WITH IR850
A
B
3-5
Advertisement
Table of Contents
