Table of Contents
Advertisement
3.1. MOUNTING PROCEDURES
3.1.1. FITTING THE HEADGEAR
1) Fit the headgear to your head size. Adjust the head gear first
before attaching the PS15 to it.
2) Loosen all the straps and place the headgear on your head.
3) Tighten the straps until the headgear fits firmly.
3.1.2. GOGGLES INSTALLATION AND ADJUSTMENT
Now you are ready to mount the PS15 on to your headgear.
1) Remove the already adjusted headgear from your head.
2) Insert the head/helmet mount adapter (A) to mounting bracket
of PS15 (B), then tighten adapter screw (C) firmly (Figure 3-1).
3) Insert the top edge of the mount (D) under the keeper (E) on the
head/helmet mount bracket and rotate downward until the latch
(F) engages. To release the mount (G) from the helmet bracket,
press the release (H) and pull forward and down (Figure 3-2).
3-2
A
C
FIGURE 3-1
H
FIGURE 3-2
B
E
D
F
G
Advertisement
Table of Contents
