Table of Contents
Advertisement
4) Align the adapter and the head/helmet mount as shown on the
figure. Slide the goggles rearwards until the alignment boss
aligns with the alignment groove on the head/helmet mount.
Push until the goggles locks into the head/helmet mount (Fig-
ure 3-3).
5) Place the head/helmet mount with PS15 onto your head.
6) Adjust the eye relief distance by press down on side lever (I)
and sliding PS15 fore or aft to obtain a full field-of-view of the
image. Reset the diopter adjustment for best image.
The PS15 headset has a flip-up mechanism. Rotate the tilt ad-
justment lever (J) and lift the unit up.
3.1.3. MOUNTING THE ATN PS15 TO A HELMET
Attachment of ATN PS15 to a range of ballistic helmets. The Hel-
met mount fits securely onto helmet via a rugged strapping de-
vice and grooved hooks. With helmet mount, the PS15 can be
positioned directly in front of user's eyes or flipped up out of view-
ing position.
1. Loosen the screw (C). Attach the adapter (A) to the rail (B) of
ATN PS15. Tighten the screw (C) anew (Figure 3-4).
2. Tighten and fixate the straps (D).
3. Align the adapter and the head. Slide the monocular rear-
wards until the alignment boss (H) aligns with the alignment
groove (F) on the helmet mount. Push until the monocular
locks into the helmet mount.
J
I
FIGURE 3-3
3-3
Advertisement
Table of Contents
