Applying Power
Before applying power to anything, set your amp(s) to a clean tone and set the tone controls to a flat EQ
response (on most amps, this would be 0 or 5 on the tone controls). Then follow the steps listed below.
1.
Turn the amp volume all the way down.
2.
Connect the plug of the PS0913B power supply to the power jack on the rear panel of the BP355.
Connect the other end of the PS0913B power supply to an AC outlet. Turn the BP355's Master Level
3.
knob (Knob 6) down to "0".
4.
Turn the power of your amplifier(s) to the on position and adjust the volume(s) to a normal playing
level.
Gradually increase the BP355's Master Level knob to achieve the desired volume.
5.
4. Turn amp volume up
1. Turn amp volume down
2. Connect PS0913B to power jack
5. Turn the BP355's Master Level
to the desired listening volume
3. Connect PS0913B
to AC outlet and
turn the BP355's
Master Level to "0"
10