Creating Panoramic Images - Olympus Stylus 7030 Instruction Manual

Creating panoramic images

(p mode)
1
Set the shooting mode to p.
2
Press G to go to the submenu.
3
Use HI to select the desired mode
and then press the A button to set.
Submenu 1
AUTO
MANUAL
PC
For details on installing the PC software
(ib), see "Battery charge and camera setup"
(p. 10).
When set to [AUTO] or [MANUAL], [IMAGE
SIZE] (p. 31) is fi xed to [2].
The focus, exposure (p. 28), zoom position
(p. 27), and white balance (p. 28) are locked
at the fi rst frame.
The fl ash (p. 27) is fi xed to $ (FLASH OFF)
mode.
24 EN
PANORAMA PANORAMA
4 4
14
M
Application
Three frames are taken and
combined by the camera. The
user only composes the shots
so that the target marks and
pointers overlap, and the camera
automatically releases the shutter.
Three frames are taken and
combined by the camera. The
user composes the shots using
the guide frame and manually
releases the shutter.
The frames that were taken are
combined into a panorama image
using the PC software (ib).
Taking pictures with [AUTO]
1 Press the shutter button to take the fi rst
frame.
2 Move the camera slightly in the direction
of the second frame.
AUTO AUTO
Target mark
0.0 0.0
WB WB
Pointer
AUTO AUTO
3 Move the camera slowly while keeping it
straight, and stop the camera where the
pointer and target mark overlap.
●
The camera releases the shutter
automatically.
To combine only two pictures, press the
A button before taking a third frame.
4 Repeat Step 3 to take a third frame.
●
After the third frame is taken, the camera
automatically processes the frames and the
combined panorama image is displayed.
To exit the panorama function without
saving an image, press the m button.
If the shutter does not automatically release,
try [MANUAL] or [PC].
CANCEL MENU SAVE
Screen when combining images
from left to right
CANCEL MENU SAVE
AUTO AUTO
OK
AUTO AUTO
OK