Travel Lock - Philips RQ1090 Instructions Manual

English
12
- To remind you to replace the shaving unit, the
shaving unit symbol flashes (all types) and you
hear a beep when you switch off the shaver
(RQ1090 only). This happens at the end of 7
successive shaves to remind you to replace the
shaving unit.
Note: The displays of types RQ1060 and RQ1050 look
different but show the same indication.

travel lock

You can lock the shaver when you are going to
travel. The travel lock prevents the shaver from being
switched on by accident.
activating the travel lock
1 Press the on/off button for  seconds to enter
the travel lock mode.
The lock symbol appears on the display (all
,
types) and you hear a beep (RQ1090 only) to
indicate that the travel lock has been activated.
Note: The displays of types RQ1060 and RQ1050 look
different but show the same indication.
Deactivating the travel lock
1 Press the on/off button for  seconds.
The motor starts running to indicate that the
,
travel lock has been deactivated.
The shaver is now ready for use again.
Note: When you place the shaver in the plugged-in
Power Pod, the travel lock is automatically deactivated.