Sending And Receiving Images; Sending Images; Receiving Images/Adding A Host - Olympus E-PL2 Instruction Manual

6

Sending and receiving images

The optional OLYMPUS PENPAL can be used to upload pictures to, and receive
pictures from, Bluetooth devices or other cameras connected to an OLYMPUS
PENPAL. Visit the OLYMPUS website for more information on Bluetooth devices.
Before sending or receiving images, select [ON] for [c/# MENU DISPLAY] >
[# MENU DISPLAY] to make the accessory port menu accessible.

Sending images

Resize and upload JPEG images to another device. Before sending images,
make sure that the receiving device is set to the mode for receiving data.
1
Display the picture you wish to send full
frame and press Q.
2
Select [SEND A PICTURE] and press Q.
Select [SEARCH] and press Q in the next dialog.
•
The destination will be searched and displayed.
6
3
Select the destination and press Q.
• The image will be uploaded to the receiving device.
• If prompted to enter a PIN code, enter the code for
the receiving device and press Q.

Receiving images/adding a host

Connect to the transmitting device and download JPEG images.
1
Select [OLYMPUS PENPAL SHARE] in
the A tab of the accessory port menu
(P. 90).
2
Select [PLEASE WAIT] and press Q.
• Perform operations for sending images on the
sending device.
• Transmission will start and a [RECEIVE PAIRING
REQUEST] dialog will be displayed.
3
Select [ACCEPT] and press Q.
• The image will be downloaded to the camera.
• If prompted to enter a PIN code, enter the code for
the transmitting device and press Q.
68 EN
JPEG
ROTATE
m <
<
SEND A PICTURE
Z
BACK SET
INPUT PIN CODE
Please input PIN code.
0 0 0 0
CANCEL SET
A
OLYMPUS PENPAL SHARE
B
OLYMPUS PENPAL ALBUM
C
ELECTRONIC VIEWFINDER
c
#
BACK SET
INPUT PIN CODE
Please input PIN code.
0 0 0 0
CANCEL SET