Zoom frame AF/zoom AF
You can zoom in on a portion of the frame when adjusting focus. Choosing a
high zoom ratio allows you to use autofocus to focus on a smaller area than is
normally covered by the AF target. Autofocus is also available over a wider area
of the frame than with AF target selection.
1
250 F5.6
250
Shooting display
1
Press the U button to display the zoom frame.
•
If the camera was focused using autofocus just before the button was pressed,
the zoom frame will be displayed at the current focus position.
•
Use FGHI to position the zoom frame.
Press INFO and use FG to choose the zoom ratio.
•
Positioning the zoom frame
2
Press the U button again to zoom in on the zoom frame.
•
Use FGHI to position the zoom frame.
Press INFO and use FG to choose the zoom ratio.
•
3
Press the shutter button halfway to initiate autofocus.
$
Notes
•
Autofocus is available and pictures can be taken both when the zoom frame is
displayed and when the view through the lens is zoomed in.
•
At higher zoom ratios, autofocus is more accurate when the view though the lens is
zoomed in.
#
Caution
•
Zoom is visible only in the monitor and has no effect on the resulting photographs.
36 EN
Q / / U
Q
U
U
L
N
01:02:03
01:02:03
30
30
0.0
0.0
Zoom frame AF
Area in which zoom frame
can be positioned
U
(Press and hold)
U
U
L
N
01:02:03
01:02:03
30
30
U
U
250
250 F5.6
0.0
0.0
Comparison of AF
and zoom frames
10x
10x
Zoom AF
7x
10x
14x