Canon mv880xi Instruction Manual page 129

Message
PRINTER ERROR
PRINT ERROR
HARDWARE ERROR
RECHARGE THE
PRINTER BATTERY
COMMUNICATION
ERROR
CHECK PRINT
SETTINGS
PRINTER IN USE
PRINTER WARMING UP
PAPER LEVER ERROR
PRINTER COVER OPEN
NO PRINTHEAD
Downloaded From VideoCamera-Manual.com Manuals
Cancel printing. Turn off the printer and turn it back on. Check the printer
status.
Cancel printing, disconnect the USB cable and turn off the printer. After a
while, turn the printer back on and reconnect the USB cable. Check the
printer status.
When you are printing using the
Cancel printing. Turn off the printer and turn it back on. Check the printer
status.
The printer battery is depleted.
The printer is experiencing a data transmission error. Cancel printing,
disconnect the USB cable and turn off the printer. After a while, turn the
printer back on and reconnect the USB cable.
When you are printing using the
Or, you attempted to print from a memory card that contains a large
number of images. Reduce the number of images.
The print setting cannot be used for printing with the
The printer is in use. Check the printer status.
Printer is warming up. If the message does not disappear after a few
seconds, check the printer status.
Paper lever error occurred. Adjust the paper selection lever to the proper
position.
Close the printer cover securely.
No print head is installed in the printer or print head is defect. Refer to the
instruction manual of your printer.
Explanation
button, check the print settings.
button, check the print settings.
E
button.
129