Preset Timing Modes - Samsung SyncMaster 520DX User Manual

for a certain amount of time. The LCD Display automatically returns to normal operation when
you press a key on the keyboard. For energy conservation, turn your LCD Display OFF when
it is not needed, or when leaving it unattended for long periods. The PowerSaver system
operates with a VESA DPM compliant video card installed in your computer. Use the software
utility installed on your computer to set up this feature.
PowerSaver (When used as a Network monitor)
State
Power Indicator
Power
Consump-
tion
PowerSaver (When used as a normal monitor)
State
Power Indicator
Power
Consump-
tion
Note
• The actual power consumption may be different from the indicated power consumption
above if the system conditions or settings are changed.
• To stop any power consumption, turn off the switch or disconnect the power cable on the
back. Be sure to disconnect the power if you intend to stay away from home for many
hours.
• If you connect a network box (sold separately), the LFD will no longer be in compliance
with Energy Star 5.0.

Preset Timing Modes

If the signal transferred from the computer is the same as the following Preset Timing Modes,
the screen will be adjusted automatically. However, if the signal differs, the screen may go
blank while the power LED is on. Refer to the video card manual and adjusts the screen as
follows.
Display Mode
IBM, 640 x 350
IBM, 640 x 480
IBM, 720 x 400
MAC, 640 x 480
MAC, 832 x 624
Specifications
Normal Oper-
ation
On
520DXn 310 W
Normal Oper-
ation
On
520DX 260 W
Horizontal
Frequency
(kHz)
31.469
31.469
31.469
35.000
49.726
Power sav- Power off
ing mode (Power-but-
ton)
Blinking On
Less than5 W Less than 5 W Less than 0 W
Power sav- Power off
ing mode (Power-but-
ton)
Blinking On
Less than2 W Less than 1 W Less than 0 W
Vertical Fre- Pixel Clock
quency (Hz) (MHz)
70.086 25.175
59.940 25.175
70.087 28.322
66.667 30.240
74.551 57.284
Power off
(Power-
switch)
Off
Power off
(Power-
switch)
Off
Sync Polarity
(H/V)
+/-
-/-
-/+
-/-
-/-