Table of Contents
Advertisement
No Signal Power Down
The TV will automatically turn itself off after 15 minutes when no
signal is detected. You can change the setting to Off for the
following purposes:
Low signal strength of analog channel (no signal detection)
v
Only Audio L/R is connected to external input to listen to music
v
through the TV speakers.
To change the no signal power down setting:
1
From the Options menu, highlight Power Management, and
then press the ENTER button.
2
Highlight No Signal Power Down, and then press the ENTER
button.
3
Press the ▲/▼(arrow) buttons to highlight the item you want
to change, and press the ◄/►(arrow) buttons to select On or
Off.
Using HDMI
®
This is a new feature that uses CEC technology and allows you to
control Toshiba HDMI
remote via HDMI
page
29)
When Enable HDMI CEC Control in the HDMI CEC Control
Setup menu is set to On (see
the HDMI
HDMI
CEC playback device (Blu-ray
®
control
With your TV's remote control, or using the HDMI
Control menu, you can control the connected HDMI
playback device you are watching.
Available remote control key functions
Button:
PLAY
STOP
PAUSE
SKIP Forward
Default setting for this feature is On.
v
A warning message will appear 1 minute before the TV turns off.
v
CEC
CEC compatible devices from the TV
®
connection (see
®
CEC functions described below will be enabled.
®
Description:
Begin playback
Stop playback
Pause the picture during play or record mode
Skip Forward
Setting up your TV
Using HDMI® CEC
"HDMI® CEC connection" on
"Setting up HDMI® CEC" on page
Player/DVD player, etc.)
TM
85
87),
CEC Player
®
CEC
®
Hide quick links:
Advertisement
Table of Contents
