Palm-Rest Assembly; Removing The Palm-Rest Assembly - Dell XPS L701X Service Manual

Palm-Rest Assembly

WARNING:
Before working inside your computer, read the safety information
that shipped with your computer. For additional safety best practices information,
see the Regulatory Compliance Homepage at
www.dell.com/regulatory_compliance.
CAUTION:
Only a certified service technician should perform repairs on your
computer. Damage due to servicing that is not authorized by Dell™ is not covered
by your warranty.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as a
connector on your computer).
CAUTION:
To help prevent damage to the system board, remove the main battery
(see "Removing the Battery" on page 13) before working inside the computer.

Removing the Palm-Rest Assembly

1 Follow the instructions in "Before You Begin" on page 9.
2 Remove the battery (see "Removing the Battery" on page 13).
3 Remove the module cover (see "Removing the Module Cover" on
page 15).
4 Remove the memory module(s) (see "Removing the Memory Module(s)"
on page 17).
5 Follow the instructions in step 5 in "Removing the Hard Drive(s)" on
page 27.
6 Remove the optical drive (see "Removing the Optical Drive" on page 33).
7 Remove the three screws that secure the palm-rest assembly to the base
cover.
Palm-Rest Assembly
8
37