Chap. 2 - Getting Started; Installation Instructions; Main Commands - Cellular Line Interphone URBAN User Manual

CHAP. 2 - GETTING STARTED

2.1 Installation instructions

Follow the sequence shown in the figures below for installation of the components.
1
If possible, remove the two
cushions or padding
3
Position the strips of Velcro
for the speakers
5
Choose the microphone to use:
4 Filp-up/jet helmet
2
Locate the area in correspondence
with the ear
4
Place the speakers
Full face helmet

2.2 Main commands

Music
Volume +
Phone
music
Led
Volume -
FM Radio
Power On
Power Off
Volume
Intercom, FM radio, phone and music functions
Up (<)
Intercom / On-Off
Bluetooth Unit
fm
Down (>)
Press until the blue LED comes on
Hold pressed until the red LED comes on and
the device turns off
Press the buttons "Volume +" to increase and
"Volume –" to decrease the volume.
Press to directly activate (or deactivate) the
intercom communication.
Press to directly activate (or deactivate) FM
fm
radio.
Press to directly access the functions of the
phone.
Press to directly activate (or deactivate) the
music
playing of music.
These commands are via direct access. It is
therefore possible to move from one function to
another with the pressing of a button. It is not
necessary to disable a function before moving
on to another.