Useful information
How to clean and store the product
Check after use of the Biobelt
After using the Biobelt, turn it off by pressing the [Power] button.
When the power is turned off, separate the power plug from the outlet.
How to clean the Biobelt
1.
If the Biobelt has any moisture or sweat, use a dry towel to wipe
it off.
▪ Do not leave any moisture on the Biobelt after cleaning the
product.
When cleaning the Biobelt, do not wash with water or dry clean.
- Doing so may cause electric shock or short circuit.
Caution
When cleaning the Biobelt, make sure to turn off the power and unplug it.
How to store the Biobelt
Store the Biobelt lying flat (not folded) and in a well ventilated area.
If you must fold it, do so the same way as you received it. Folding it in the opposite direction may cause
the internal circuitry to break.
Separate the controller from the Biobelt and place it in a bag.
Product Storage/Transportation
The Biobelt has to be stored and transported according to the following appropriate conditions.
Product Storage/
Transportation
2
- Storage Temperature: 32 ~ 113°F / 0 ~ 45°C
- Transportation Temperature: -13 ~ 158°F / -25 ~ 70°C
- Humidity: 15 ~ 93%
- Air pressure: 700 ~ 1060 hPa
- Place without humidity and no direct sunlight.
- Place without dust and with good ventilation.