Cleaning And Care - Fakir LIBRA Instruction Manual

• Place the scale on a solid and flat surface.
• Press "ON/OFF "button to turn on the scale.
• Wait until LCD shows "0", and pres MODE button to
choose "Water" or "Milk" mode.
• Put a liquid container on to the scale platform.
• Press ZERO button to reset LCD to "0".
• Pour liquid (water or milk) in to the container, LCD
shows the volume of the liquid.
• Press MODE button to choose "Weight" mode and
view the weight of liquid.
Zero/Tare Function
g
Weight Milk Water
g
Weight Milk Water
g
Weight Milk Water
g
Weight Milk Water
g
Weight Milk Water
g
Weight Milk Water
g
Weight Milk Water
By pressing ZERO, you can see the total weight of all
loads on the scale. If you want to weigh more loads, just
press ZERO to reset LCD reading to '0' again.
Auto Shut Off
To weigh different
loads consecutively
without removing
Manual Shut Off
loads from the
scale, first put the
load on the scale,
get weight
reading. Press
ZERO button to
reset the LCD
reading to "0"
before adding next
Note: When display shows "0" ,press "ON/OFF" to
load. You can
turn off the scale; when display shows weight reading,
repeat this
press "ON/OFF" for 3 seconds to turn off the scale.
operation.
Warning Indicators
Condition 1:
LCD will show
"0"each time
ZERO is pressed.
Icon "0" will show
on lower left corner
of LCD, indicating
"ZERO" function is
active. Max.

Cleaning and Care

weight capacity
•
remains
unchanged.
•
Condition 2:
LCD will show
"0"each time
ZERO is pressed.
•
Icon "T" will show
on upper left
corner of LCD,
indicating "TARE"
function is active.
Max. weight
capacity is reduced
by total weight of
all loads.
06
g
1.
2.
Clean the scale with a slightly damp cloth. DO NOT
immerse the scale in water or use chemical/abrasive
cleaning agents.
All plastic parts should be cleaned immediately after
contact with fats, spices, vinegar and strongly
flavored/colored foods. Avoid contact with acids citrus
juices.
Always use the scale on a hard, flat surface. DO NOT
use on carpet.
Auto shut-off occurs if
display shows '0' or
shows the same weight
reading for 2 minutes.
To maximize battery life,
always press ON/OFF
again to turn off the scale
after using.
1. Replace new battery.
2. Scale overload.
Remove item to avoid
damage. Max.weight
capacity is indicated on
the scale.