ATTO Technology FastStream VT 5300 Technical Specifications page 2

FastStream VT 5300
Virtual Tape Appliance
Technical Features
Virtual Tape Library
RAID Levels
Key Features
Hardware Specifications
Fibre Channel Interface
SCSI Interface
Management Interface
Management
Local and Network Management
Environmental & Physical Specifications
Dimensions
Operating Environment
Storage Environment
Power
Airflow
RoHS Compliant
Ordering Information
Model Number
Accessories
Technical Specification
FastStream VT 5300
©2008 ATTO Technology, Inc. Specifications subject to change without notice.
• Virtual Libraries Supported: 2
• Maximum Virtual Tape Drives per Library: 30
• Maximum Virtual Tapes per Library: 256
• SCSI-3 Support
• All required tape and media changer commands supported
• 0, 1, 5 and 10 (JBOD is also supported) with Global Hot Spares
• RAID Rebuild with Tunable Rebuild Priority
• Pre-configured Inquiry Strings for 15 Tape Libraries
• Advanced VTL Capacity Expansion (AVCE™) Technology
• Drive Initialization and Verification, Drive Performance Metrics
• Can be shared in heterogeneous environments
• SpeedWrite™ Performance-enhancing Technology
• Field Upgradeable Firmware
• O/S independent operation
• Battery Backed Event Log
•
ECC Protected Memory
• 4 Gigabit, auto-negotiates to 2/1 Gigabit devices
• Two Optical SFP (Small Form Factor Pluggable) Fibre Channel ports
• Class 3 and Intermix ANSI Fibre Channel Specifications
• PLDA, public loop login (NL-ports) and fabric connect (N-port)
• Full-duplex transmissions
• Dual independent Ultra320 LVD/SE SCSI bus ports
• Dual stacked VHDCI SCSI connectors
• Backwards compatible with all single-ended SCSI devices
• RJ-45 connector for Ethernet management port
• RS-232 serial port
• ExpressNAV
TM VTL manager browser-based user interface for remote
configuration, management and diagnostic capabilities
• Local diagnostics and configuration supported via CLI, Telnet and FTP
• Command line ASCII text management access via the Ethernet port
• 1.579" (1U) H x 16.494" W x 10.000" L
• Temperature 5 - 40° C
Humidity: 10 - 90% non-condensing
●
• Temperature 0 - 40° C
Humidity: 20 - 80% non-condensing
●
• Input: 100-240VAC +/- 18%, 50/60 Hz
• 11 CFM recommended
Ambient air not to exceed 40° C
●
• Yes
• FSVT-5300-0R0
• FC Cables: CBL-LCLC-R10 (10M LC-LC cables)
• SCSI Cables: CBL-V68E-R3X (1M VHDCI to HD68 cables)
Power Behind the Storage
For More Information:
www.ATTOTech.com
or to Purchase:
www.ATTOStore.com
(716) 691-1999
Rev 2/08