Table of Contents
Advertisement
In the MAX! software, you need to create one separate
room for the channel "Central heating" and one for the
channel "Hot water". The channel "Central heating" can
also be used in rooms that include a MAX! Wall Thermo-
stat+ already.
If you want to use your system without a MAX! Cube, you
can also directly teach-in the channel "Central heating"
to the MAX! Wall Thermostat+.
7
m
anual oPeratIon
With the channel buttons B or D, the single channels can be
switched on and off directly on the device. If the device is ope-
rated in connection with a MAX! Cube or MAX! Wall Thermo-
stat, the set comfort or eco temperature will be applied.
Manual operation of "Central heating" channel:
•
Press the channel button B shortly.
The central heating is switched on until the next time the cur-
rent week program changes.
Manual operation of "Hot water" channel:
Press the corresponding channel button D shortly.
•
This activates the Boost function: the hot water tank will be
switched on for 60 minutes.
By the end of the Boost phase, the channels automatically
change back to the prior operating mode.
Manual operation
15
Advertisement
Table of Contents
