How To Calibrate - di-GPS Mini 3-DC series User Manual

HOW TO CALIBRATE

4. Start the Z axis
calibration
5. Calibration
completed
Remark: If the LED keeps flashing after several times of swing, swing the camera a bit faster to
activate the calibration.
DI-GPS® IS A REGISTERED TRADEMARK OR A TRADE MARK OF DAW N TECHNOL OGY LIMITED
NIKON D2HS, D2X, D2XS, D200, D3, D3S, D3X, D300, D300S, D700, D800, D800E, D4, D90, D3100, D5000,
D5100, D5200 AND D7000 ARE REGIST ERED TRADEMARK OR A TRADEMARK OF NIKON C ORPORATION IN
THE UNITED STATES AND/OR OTHER COUNTRIES.
FUJIFILM AND S5 PRO ARE REGISTERED TRADEMARK OR A TRADEMARK OF FUJIFILM U.S.A., INC. IN THE
UNITED STATES AND/OR OTHER COUNTRIES.
a) Z axis calibration mode
starts immediately after
X-Y axis calibration
completed.
b) Red LED flash.
c) Rotate the camera to portrait position.
d) Hold the camera horizontally against the ground.
e) Follow either diagram (i) or (ii)
until the Red LED
flashing.
(i) *Turn the camera 360 degrees
around slowly (ideal for
camera attached on tripod)
(ii) *Swing the camera slowly left and right (ideal for handheld
camera)
f) Z axis calibration completed.

GPS will automatically exit the calibration mode and return to
normal operation mode

Green LED flashing
stops
or steady on
V1.3
13