How To Calibrate - di-GPS Mini 3-DC series User Manual

HOW TO CALIBRATE

1. Set the slide to "On"
position
2. Press the "cal
button" for 3
seconds
3. Start the X-Y axis
calibration
DI-GPS® IS A REGISTERED TRADEMARK OR A TRADE MARK OF DAW N TECHNOL OGY LIMITED
NIKON D2HS, D2X, D 2XS, D200, D3, D3S, D3X, D300, D300S, D700, D800, D800E, D4, D90, D3100, D5000,
D5100 AND D7000 ARE REGISTERED TRADEMARK OR A TRADEMARK OF NIKON CORPORATION IN T HE
UNITED STATES AND/OR OTHER COUNTRIES.
FUJIFILM AND S5 PRO ARE REGISTERED TRADE MARK OR A TRADEMARK OF FUJIFILM U.S.A., INC. IN THE
UNITED STATES AND/OR OTHER COUNTRIES.
 di-GPS® M3-DC-S5
a) Yellow LED and Red LED
b) Yellow LED flashes.
c) the compass has entered the X-Y axis calibration mode
a) Keep the camera in landscape position.
b) Hold the camera horizontally against the ground.
c) Follow either diagram (i) or (ii) until the Yellow LED
flashing.
(i) *Turn the camera 360
degrees around slowly
(ideal for attachment on
tripod)
(ii) *Swing the camera slowly
left and right (ideal for
handheld)
d) X-Y axis calibration completed.
start to flash alternatively.
stops
V1.0
12