Related Manuals for ClimateMaster ET Series
Summary of Contents for ClimateMaster ET Series
- Page 1 ET Series Electronic Thermostat Installation, Operating & Maintenance Instructions Page 1...
-
Page 2: General Information
An optional ClimateMaster remote sensor is This Installation, Operation and Maintenance Manual is shipped separately. for Climate Master ET Series Electronic Thermostats. Each thermostat has a 15 digit model number printed on ClimateMaster ET Series Thermostats are typically the backplate which identifies thermostat features. Refer... -
Page 3: Specifications
ET Series thermostats to be installed in your Operating Environment: 0° F (-17.7° C) to 140° F application. (60° C) with 5% to 95% relative humidity, non-condensing. NOTE: Some options are available only when the HVAC unit controlled utilizes a ClimateMaster Storage Environment: 0°... -
Page 4: Pre-Installation
ClimateMaster CMC-2000 Series Installation, Operation and Maintenance Manual. The first Emergency Override: The ET Series Thermostat can be stage CMC-2000 Series controller must have dip switches ordered with a factory programmed emergency override set to address one and the second stage controller must have option. -
Page 5: Electrical Wiring
Remote Sensor: An optional ClimateMaster remote 5) Attach the thermostat to the field supplied and installed sensor can only be installed with an ET Series Thermostat electrical junction box using the two screws provided. If equipped with a two pin connector mounted inside the the thermostat is to be mounted directly on the wall, use thermostat for that purpose. - Page 6 WITH CMC CONTROLLER Figure 4 (OPTIONAL) REMOTE AMBIENT SENSOR 24 VAC SHIELD T.B. (IN UNIT) THERMOSTAT FIELD WIRING TO CLIMATEMASTER SINGLE STAGE HEAT PUMP WITH ELECTROMECHANICAL CONTROLS Figure 5 NEUTRAL (OPTIONAL) REMOTE AMBIENT SENSOR 265V / 1 PH / 60HZ POWER SUPPLY...
- Page 7 OVERRIDE FAIL COMMUNICATION ADAPTER FAN HI COOL HEAT RECEIVE 24VAC CHASSIS TRANSMIT GROUND THERMOSTAT FIELD WIRING TO CLIMATEMASTER TWO STAGE HEAT PUMP WITH CMC CONTROLLERS Sheilded Cable TEST UNIT SHUTDOWN COMP. SHUTDOWN EMERGENCY SHUTDOWN SWITCHES LEAVING WATER TEMP DISCHARGE AIR TEMP COND COM.
-
Page 8: Unit Start-Up
Part #:69197318 ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster’s Customer Service Department at 1-405-745-6000 for specific information on the current design and specifications.
Need help?
Do you have a question about the ET Series and is the answer not in the manual?
Questions and answers